No Tx

5 posts / 0 new
Last post
Last seen: 5 years 3 months ago
Joined: 2009/11/12 - 13:16
No Tx

Very new to WSPR and running an ICOM 703 from a Vista Laptop via a G4ZLP DigiMaster USB MiniPRO interface. I can get to receive ok but unable to Tx either via the usb com port or via VOX on the 703. If I unplug the speaker port on Tx I get the audio tone in the speaker but no TX on the radio. I'm using the six pin DATA socket on the 703. When I go to Tx using the com port I get an error "Unable to open com port 15" (thats the one it's installed on). The 703 is set to USB and have tried all Vox settings. Have also tried data mode SSB-D set to USB still no luck.

Any one got any idea's co I've nearly run out.


Peter G4NTN