NEED SETUP PARAMETERS FOR APPLE MAC

3 posts / 0 new
Last post
Anonymous (not verified)
NEED SETUP PARAMETERS FOR APPLE MAC

I recently began to setup my station for receiving signals on 2 Meters. Thanks to KP4MD Carol... and over an hour on the telephone, we were able to set the proper values for RX operation and I successfully copied her TX and. in addition, a station in Santa Rosa, CA. I am running a Mac Computer with WSPR version 2.21.

The issue here... we I do not know what settings to put into motion in order for the Computer to generate the audio signal for modulating the Transmitter. We have tried numerous values and choices but to no effect. I have interfaced this Computer for Digital modes and understand utilizing the USB for PTT signaling as well as the Input and Output Audio settings within the Mac, we run PSK31 and many other modes, with a Home-Brew interface and also a SignaLInk USB interface.

It appears that the settings in the (PTT Method & PTT Port) may be where our problem lies but the combination of choices were far too many at the late hour when we completed the first RX tests. If you run a Mac and know the proper settings in the WSPR, I would be most appreciative, if you could provide some guidance and comments.

73's