KENWOOD TS-590S ON WSPR 2,0

3 posts / 0 new
Last post
LA4ESA
Offline
Last seen: 4 years 4 months ago
Joined: 2014/10/30 - 18:10
KENWOOD TS-590S ON WSPR 2,0

Partly succeed on connected TS-590S to WSPR. Receiving signals very nice, but no one out there hear me.
What could i have done wrong?

TS-590:
connected to computer through USB cable,
menu 63 set on USB
Menu 64 set to 1
Menu 65 set to 1
all bands on USB and data mode switched on.
ALC adjusted by adjusting virtual soundcard on PC, speaker
Power: tried several settings, set to 20W, no one still not read me.

WSPR 2.0
All parameters set, correct audio in and out.
WSPR switch radio from receiving to TX, no problem.
The freq are beeing set correct, i use HRD to adjust the freq correctly. Then switch HRD off.

Seems like the radio is not transmitting the macro with callsign, locator and power. Radio only transmitting one tone like the one transmitting while tuning the radio.

I have tried the BETA version of 2.11, no succeed, then back to V.2.0, installed, unstalled then reinstalled. nothing helps.
Hopefully someone out there have any ideas for me.

73 de Per LA4ESA